THESIS
2016
xii, 65 pages : illustrations (some color) ; 30 cm
Abstract
In this thesis, membrane-type metamaterials based on resonance have
been investigated in a ventilated system with glancing incidence of sound.
Owing to hybrid membrane resonators (HMRs), additional impedances
couple with the impedance of the main tube and generate an equivalent
impedance that differs from air. As a result, the backscattering cannot be
zero and leads to transmission loss (TL) in the outgoing side. However,
the TL is related with the systems dissipations which are decided by the
vibration modes. Therefore, not all of the transmission coefficients have
the same value. The resonances of HMRs can be easily tuned by changing
the weight and radius of the central rigid disk.
The negative bulk modulus is demonstrated here using a cylindrical chamber
sealed by a mem...[
Read more ]
In this thesis, membrane-type metamaterials based on resonance have
been investigated in a ventilated system with glancing incidence of sound.
Owing to hybrid membrane resonators (HMRs), additional impedances
couple with the impedance of the main tube and generate an equivalent
impedance that differs from air. As a result, the backscattering cannot be
zero and leads to transmission loss (TL) in the outgoing side. However,
the TL is related with the systems dissipations which are decided by the
vibration modes. Therefore, not all of the transmission coefficients have
the same value. The resonances of HMRs can be easily tuned by changing
the weight and radius of the central rigid disk.
The negative bulk modulus is demonstrated here using a cylindrical chamber
sealed by a membrane with a rigid disk attached in its center. When
the HMR resonates, a sharp dip happens in the transmission spectrum and
the effective bulk modulus becomes negative, implying that the volume
change is out of phase with the applied dynamic pressure. The process is
also realized by theory using a response function.
A flow-through silencer with high and broadband transmission loss in low
frequency has been designed by using multiple units consisting of four rectangular
membranes. In each rectangular membrane, two asymmetric rigid
platelets are attached so as to further increase the number of resonances.
What is more, the high transmission loss mainly comes from absorption.
By consisting of a dipole resonator and a monopole resonator, a perfect
absorption is realized in a ventilated system. The absorption functionality
is independent of the incident direction and the size of absorber is at
least 10 times smaller than the sound wavelength. A decorated membrane
resonator (DMR) partially covers the tube and is fixed in the center to
supply the dipolar movement. And the hybrid membrane resonator (HMR)
mounted on the sidewall of the tube offers monopolar movement through
compression and rarefaction. The responses of the two resonators are in
phase for the incident side and out of phase for the outgoing side. Therefore,
backscattering is eliminated through the impedance matching to air, while
the transmission also vanishes because the two responses cancel each other
through destructive interference. As a result, total absorption is achieved.
Apart from this, another ventilated composite absorber which comprises
two similar HMRs mounted on the sidewall of the tube is also demonstrated
to have perfect absorption at low frequency. It is worth mentioning that
no air resistance exists in this absorber. The air velocities in the vicinity
of Unit 1 have the opposite symmetry to that of Unit 2, which will further
cancel each other, and the equivalent surface impedance of the whole
system matches that of air, so total absorption is gained. However, when
reversing the incident direction, asymmetric absorption and reflection are
obtained due to mismatched impedance.
Post a Comment